Petcube Bites 2 - Page 7

7
Reminder: It is likely that your Petcube
will need a firmware update right after
it is connected. The firmware update
will be downloaded to your camera
within 24 hours. When the LED light
on the Petcube will start blinking green
rapidly (fig 4.1.14), do not disconnect
your device. The installation only takes
5 minutes.
Fig. 4.1.9
Fig. 4.1.12
Fig. 4.1.13 Fig. 4.1.14
Fig. 4.1.10
Fig. 4.1.11