EasyManua.ls Logo

petMAP graphic - CritterCuff;RamseyCuff Information; Cuff Size and Fit Requirements

Default Icon
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20
CritterCuff /RamseyCuff Information
The Ramsey Medical, Inc. CritterCuffs and larger
RamseyCuffs are designed specifically to be used with
the petMAP. Using any other brand of cuffs may result in
inaccurate BP readings, or even a failure to function and
is strongly discouraged for these reasons.
It is important to have the proper size cuff and the proper
snug fit. Improper size and a loose cuff application on the
limb will result in inaccurate BP readings or even a failure
to determine the BP.
CUFF SIZE
Choose a cuff whose width is approximately 42-50% of
the circumference of the leg or tail of the animal. Best
results and accuracy will be achieved by using a cuff size
where the cuff’s index line is in the “optimum region”
marked on the cuff by dotted lines. If this is not possible,
NEVER exceed the solid boundary lines!
CUFF FIT
The cuff should fit “snug tight”, i.e., tight enough to get all
of the air out of the cuff (attach cuff to animal BEFORE
attaching the cuff hose to the petMAP), and tight enough
so that it will not slip off of the limb. However, the cuff
should not be so tight that it hurts the animal or is so tight
it functions as a tourniquet when not inflated. The proper
size cuff for the limb chosen, and its “snug tight”
application are absolutely essential if good results are to
be achieved! Remember also to set petMAP for species
and cuff site before use, but always before recording
readings on the animal’s chart.