www.petsafe.net 5
Install SunBlock Top
™
1. Using eight of the enclosed cable ties, loosely attach the SunBlock Top
™
at the corner grommets to the top rail corners of the kennel (3A).
2. Using the remaining cable ties, loosely attach the sides of the SunBlock
Top to the sides of the kennel.
3. Hand tighten all cable ties equally until SunBlock Top fi ts snug over
kennel. Using wire cutters, cut off excess stems of cable ties.
Note: Kennel can be locked
3A
Expand your kennel by purchasing additional panels
Step
3
To Next Page
Loading...
