Care and maintenance
66
Fig. 12 - 03
12.05 Oiling the hook
1
Switch off the machine!
Danger of injury if the machine is started accidentally!
When required, pour oil through hole 1 up to the upper marking in inspection glass 2.
Before commissioning the machine, and after long downtimes, also add a few drops of
oil to the hook race, see arrow in Fig. 12-04.
Only use oil with a mean
viscosity of 10.0 mm
2
/s at 40°C and a density of 0.847 g/cm
3
at 15°C.
We recommend
PFAFF sewing machine oil, part no. 280-1-120 105.
●
●
Fig. 12 - 04
2
To Next Page
Loading...
