Pfaff 545 User Manual

To prevent thread jamming, hold both thread ends until the machine has made a few
stitches. . „
Do not pull the material during sewing: the machine wiil feed the fabric automatically.
Use needles of the correct system only (see Chapter 6).
Never use rusty needles.
Use high-quality threads only.
Always bring the take-up lever to its highest point before you remove the material.
3. Cleaning and oiling
Careful cleaning and regular oiling will Increase the service life of your machine.
After you have removed the dust which has accumulated on the machine in transit, take
a clean rag and remove the grease from all nickel-plated and polished Parts. Apply a
few drops of kerosene to all oiling points marked with dash lines in Figs. 1. 2 and 3.
raise the presser foot, unthread the needle, remove the bobbin case and let the J^achine
run briefly. Apply a few drops of Pfaff sewing machine oil No. 280-1-120122 to all points
of friction.
While these points of friction should be oiled twice a week, the sewing hook "lUSt be
oiled each day the machine is in operation. Make particularly sure that oil is applied to
oilhoie R (Fig. 4).
Althougti the bevel geers ere enclosed in ceses and require no speclel mamtenence.
it is recommended to replace the old grease by Pfaff grease once a
year. Owing to the special lubricating properties of this grease, the flanks of the beve
gear teeth should be greased only lightly.
From the library of: Superior Sewing Machine & Supply LLC

Pfaff 545 Specifications

General

Brand	Pfaff
Model	545
Category	Sewing Machine
Language	English