Pfaff 939 U User Manual

9 - 11
Setting up
9.12 Entering start and end backtacks or condensed stitches
● Switch on the machine.
● If necessary switch off the "darning seam" or "counted seam" function, see Chapter 10.01
Darning program or Chapter 10.02 Counted seam.
● By pressing the corresponding +/- key ("A") select the desired value for the number
of forward stitches (A) of the start backtack. (only on the PFAFF 939 U and the
PFAFF 3704-2/03).
● By pressing the corresponding +/- key ("B") select the desired value for the number of
reverse stitches (B) of the start backtack.
● By pressing the corresponding +/- key ("C") select the desired value for the number of
reverse stitches (C) of the end backtack.
● By pressing the corresponding +/- key ("D") select the desired value for the number
of forward stitches (D) of the end backtack (only on the PFAFF 939 U and the
PFAFF 3704-2/03).
● By pressing the keys start backtack and/or end backtack, activate the corresponding
function (arrow appears next to the corresponding function key).
ABCD
3333
ABCD
0330
PFAFF 939 U;
PFAFF 3704-2/03 PFAFF 3704-2/02

Pfaff 939 U Specifications

General

Brand	Pfaff
Model	939 U
Category	Sewing Machine
Language	English