TABLE OF CONTENTS
1. KNOWING YOUR MACHINE 6
Foot control 8
Power / light switch 8
Opening front cover 8
Opening work table 8
Preparation for threading 9
Thread guide pole 9
Spool discs and spool holders for cone spools 10
Spool nets 10
Waste tray 11
Intergated seam guide 11
Thread knife 11
Changing presser feet 11
Needle / Thread / Fabric Chart 12
12
2. GETTING READY TO SEW
Threading the machine 13
Trimming needle thread 16
Stitch Settings 18
Adjusting thread tensions 24
Basic techniques 28
Turning curved edges 28
Removing stitches from sewn fabric 28
Flatlocking using two threads or using three threads (at seam) 30
Butted seams using two threads or using three threads (at seam) 30
Pintucking using three threads 30
Making decorative braid using three threads 30
Differential feed applications 31
3. CARING FOR YOUR MACHINE 32
4. CHECKING PERFORMANCE PROBLEMS 34