41
Maintenance
Bobbin thread breaks
Did you insert the bobbin properly? Check the bobbin thread.
Is the stitch plate hole damaged? Change the stitch plate.
Is the bobbin area clean? Clean lint from bobbin area.
Is the bobbin wound correctly? Wind a new bobbin.
The seam has uneven stitches
Is the thread tension correct? Check needle thread tension and the threading.
Are you using too thick or slubbed thread? Change the thread.
Is the bobbin thread evenly wound? Check bobbin winding.
Is a correct needle used? Insert a proper needle correctly, see page 21.
7KHPDFKLQHGRHVQRWIHHGRUIHHGVLUUHJXODUO\
Did you thread the machine properly? Check how the machine is threaded.
Has sewing lint collected between the feed
dogs?
Remove the stitch plate and clean the feed dogs with a
brush.
+DYH\RXUVHZLQJPDFKLQHVHUYLFHGUHJXODUO\E\\RXUORFDODXWKRUL]HG3)$))
®
dealer!
If you have followed this trouble shooting information and still have problems, take your sewing machine
WR\RXUGHDOHU,IWKHUHLVDVSHFLÀFSUREOHPLWLVDJUHDWKHOSWRWHVWVHZZLWK\RXUWKUHDGRQDVFUDSRI
your sewing fabric and bring it to your dealer. A sewing sample will often provide helpful information.
Non-original parts and accessories
The warranty does not cover any defect or damage caused by use of non-original accessories or parts.
To Next Page
Loading...
Need help?
General
