1:7
1:7
C
Operate your Pfaff select
Winding through the needle
Even if the machine has been completely
threaded, you can still wind the bobbin.
Raise presser foot lifter (19). Pass the
needle thread through the presser foot
and downwards; then through the right
threading slot (11) and upwards.
Now, pull the thread into the take-up
lever from left to right (9). The take-up
lever must be positioned at its very top.
Pass the thread to the right under the
hook C. Then wind the thread several
times around the bobbin. Press the foot
control and winding the bobbin.
Don’t forget:
Make sure to stop the needle from
moving while winding the bobbin (see
page 1:4).
To Next Page
Loading...
Need help?
General
