56
Press the key “1” once again.
The display as seen in fig. 58 appears on the LCD.
LCD check:
Carry out a visual check for missing or incorrect symbols.
Press the key “1” once again.
The display as seen in fig. 59 appears on the LCD.
LCD check:
Carry out a visual check for missing or incorrect symbols.
Press the key “1” once again.
The display as seen in fig. 61 appears on the LCD.
LCD check:
Carry out a visual check for missing or incorrect symbols.
Press the key “1” once again.
The display as seen in fig. 60 appears on the LCD.
LCD check:
Carry out a visual check for missing or incorrect symbols.