Pfaff Creative 1473

Butterfly
Two
worksteps are
required for this:
First workstep (wings)
prog
10 2-3
jFdn 9 e
ftoLJ
Stitch width: 1.5
Stitch length: 0.5
Fringe
foot: (special accessory)
Second workstep (body)
biztz- 3 F_
Pattern
length: as
required
Key:
single
pattern
First workstep
(wings)
• First sew
a
fringe seam as a
trial, using a
piece
of scrap material.
During
sewing, try
different
stitch
lengths
until you find
the one most
suit
able.
The wings
are best
sewn in
circular
seams,
working
from the outside
inwards.
Second
workstep
(body)
•
Sew the
body as
shown in the illustration
(Fig. 1).
Flower
prog
--
1]
066263
EE
-3+
2A
Mark
out the pattern
of
the
flower
on the
fabric.
Sew the petals, stem and leaves as shown in the
illustration, Now fill in the seed capsule using a
fringe seam, working spirally from the outside
inwards (Fig. 2).
Fringe
seams
2
Suggestions:
(not
described)