Pfaff Creative 7510 A - Stretch Triple Straight Stitch (Program 01)

With program
09
you can
sew on
two-
or four-hole
buttons
without any problems.
• Remove
the
sewing foot
and lower
the
bottom
feed.
• Attach sewing
foot
No. 2A.
• Place a match between
the holes of the button
and sew
it
on
as described
on
the left
• Place the button on the
place marked.
• Turn
the
handwheel
towards
you
and position
the button so that the needle
enters
the
left hole
in the button.
• Now lower the presser
foot lifter;
the button
is
now
held by the sewing foot
holder.
• Now sew on the button.
Make sure
that
the
needle also enters
the
right
hole in the button.
• The machine
sews a tack
and the program is
completed.
When selecting
sewing
help
with the “display” key
the
upper
display
line shows “lower”,
i.e. you are
reminded
that the
bottom
feed
must
be
lowered.
Sewing
on buttons
Sewing on buttons
with thread shanks
• Remove the
match and
pull the button
and fabric
apart.
• Wrap the shank
with
sewing thread
and
knot
it
63