Pfaff Creative 7510 A - Buttonhole Programs; Standard Buttonhole (Fully Automatic); Standard Buttonhole (Semi Automatic)

If
you
wish to
create
perfect
buttonholes
of a
uniform size,
even
on
the
most
difficult
materials,
we
recommend you
use the buttonhole guide.
Attach the buttonhole
foot
No. 5A. If you
are
working with
thick
materials
such
as
overcoats, we
recommend using foot
1A and the Dual Feed
together with
the
buttonhole
guide.
All of
the
following
buttonholes can be sewn
with
the
buttonhole
guide.
Inserting
the buttonhole
guide:
1.
Remove the
detachable work support
2. Push
the
metal part
of the buttonhole guide
into
the slot
below
the needle plate from
the rear
(between
the two
arrows).
The white
plastic
part
is
over the needle
plate.
3.
Push the
guide forwards until the
catch lies
against
the rear of the free-arm.
The guide must
spring back a little to
obtain a small
distance
between the
needle plate and
catch. Without
this
clearance, the
second
bartack of the
button
hole
will not be sewn.
Inserting the
buttonhole guide
activates the
sensor.
71