Pfaff Creative 7510 A - Page 82

lunlun
iir
_
ound
buttonhole
mportant!
The round buttonhole
should be placed
vith the
round end facing
the
edge. The sewing of
he buttonhole,
however, begins
at the bartack
Jways sew the buttonholes
from
the inside
utwards
towards
the edge.
Aark the length of the
buttonhole
on the fabric
irst
making sure
to measure from the starting
oint inwards
be round
buttonhole is automatically
sewn
etween a
length
of
7
and 40
mm. The
width is
)etween
4
and 7 mm.
• Select buttonhole
No. 33.
• The pre-programmed
buttonhole length
of 22
mm appears in
the display. If you
wish, you can
alter this length with the
numbered
keys 7 and
8.
• The second
bartack can also
be self defined
for
this buttonhole
(see
standard
buttonhole).
The
stitch
density cannot
be
changed
for this
buttonhole.
Therefore you should
sew this
button
hole with a
stronger thread or gimp
thread if
required
(see
section “Buttonhles
with
gimp
thread”).
The
stitch
density of
the
second
bead can
be
adjusted with the
balance.
Important! Before
you start the buttonhole,
push
the runner of buttonhole
foot
No. 5A forwards up
to the second
red mark.
4
I
HI
79