8:7
15 16
13
12 14
Embroidery mode - edit
0LUURULQJDQG
To mirror a design side to side, touch icon (12)
and for mirroring end to end, touch icon (13).
0RYHGHVLJQLQWRKRRS
This is used to move any design that is outside
the hoop area into the hoop area. The design will
be placed as close to the previous position as
possible.
8QGR
Touch the arrow pointing left to undo your latest
design adjustment. Touch repeatedly to step back
through your adjustments.
Note: Not all adjustments can be undone. The arrows
will be greyed out if undo is not possible.
5HGR
Redo is activated when Undo is touched, so
you can step forward again through your
adjustments.
To Next Page
Loading...
