4:23
1
2
3
4
5
6
Sewing mode
Double ribbon stitches
Add dimensional elements to your decorative
stitching with the beautiful double ribbon stitches.
Narrow ribbons are woven into these special
VWLWFKHVDV\RXVHZPPDSSUR[ɌµõµULEERQV
are recommended for this technique. For best
results, use stabilizer, appropriate for your fabric
type and weight, under your fabric to support your
stitching.
1. Choose a double ribbon stitch in category 6.6.
Activate needle down. Use the start/stop button
to begin sewing. The machine will complete the
ÀUVWSDUWRIWKHVWLWFKDQGVWRSDXWRPDWLFDOO\
with the needle down. See illustration 1.
3RVLWLRQWKHÀUVWULEERQXQGHUWKHIRRWLQIURQW
of the needle and at the same angle as the
stitching. Continue sewing until the machine
stops again. See illustration 2.
3. Add a second ribbon, placing it in front of the
QHHGOHFURVVLQJWKHÀUVWDQGDWWKHVDPHDQJOH
as the travel stitches. Continue sewing until the
machine stops. See illustration 3.
4. Fold the second ribbon over itself and position
in front of the needle as before; continue
stitching until the machine stops. Both ribbons
are now on the same side. See illustration 4.
1RZIROGWKHÀUVWULEERQDQGSXOOLWLQIURQW
of the needle, crossing the second ribbon; sew
until the machine stops. See illustration 5.
)ROGWKHÀUVWULEERQDJDLQDQGSRVLWLRQLQIURQW
of the needle. Continue sewing. When the
machine stops both ribbons will be on the same
side again. See illustration 6. Continue using the
ribbon to the left that is positioned further back
and fold over to the right side in front of the
needle. Sew until the machine stops. Fold the
same ribbon back to the left side and continue
to sew. Repeat the same moment until the
desired length is achieved.