(H)
(H)
(E)
(G)
(G)
(B)
(A)
(J)
(D)
(C)
20 104 72 62-26
Adjusting of the zero feed on the buttonholes bartack
Requirements
When a button hole's bartack is selected there should be no feeding.
Adjustment
• Sew a buttonhole to check if the fabric is fed while sewing the bartacks.
• Remove the cap (E).
If the fabric is fed foward (A), turn the adjusting screw in the direction (C).
If the fabric is fed backward (B), turn the adjusting screw in the direction (D).
• Attach the cap (E).
H = Bartack
J = Stitch length dial
To Next Page
Loading...
