23
Controls
7.11 Adjusting the top feed stroke (on the PFAFF 2235 BASIC + PLUS)
● The top feed stroke can be adjusted by
turning knob 1.
7.10 Adjusting the stitch length / Reverse feed lever (PFAFF 2235 PREMIUM)
● Two different stitch lengths can be pre-
selected on the thumbs wheels 1 and 2.
● The adjustment can be made by turning
the thumb wheels.
● The larger stitch length is set on thumb
wheel 1, and the smaller stitch length on
thumb wheel 2.
● Use key 4 to call up the pre-selected
stitch lengths, see Chapter 7.05 Key-
board on machine head.
● As long as the reverse feed lever 3 is
pressed during the sewing operation, the
machine sews in reverse.
Fig. 7 - 11
1
Fig. 7 - 10
2
1
3
To Next Page
Loading...
