12
A
Oper at e your Pfaff select
Bobbin winding
Preparing the machine for
bobbin winding
Hold the handwheel (4) À rmly and turn
the handw heel release disc (3) until it
st op s i n t he d i r ect i on of t he ar r ow . Thi s
stops the needle from moving while the
machine is winding the bobbin.
Placing the bobbin
Sw itch off the main sw itch (1)
Pl ace the emp t y bobbi n so that t he smal l
pin (A) of the bobbin winder (6) snaps
into the slot of the bobbin. The Pfaff logo
is facing up.
Push the bobbin to the right
Note: The bobbin can only be wound when it
is moved fully to the right.
To Next Page
Loading...
