39
Maintenance and trouble-shooting
Changing the sewing bulb
Sw itch off the main sw itch (1)
• Disconnect the main plug and the foot
control plug from the machine.
• Take off the removable accessory tray
(16).
The sewing bulb is located inside the left
side of the sewing machine.
Removal:
• Hold the sew ing machine tightly.
• Push the bulb into its socket as far as it
will go.
• At the same time, turn the bulb a half
turn anti-clockw ise and remove it.
Insertion:
• Insert the bulb in the diagonal socket
and t u r n i t so t hat bot h stops of the
bulb engage.
• Now push the bulb fully into the
sock et and t u r n i t cl ock w i se so t hat i t
is held À rmly.
Important!
The maximum allowed wattage of the
bulb with a plug-in socket is 15 watts!
To Next Page
Loading...
