7
Introduction
Stitch Presser
Foot
Application
4.0 3.0/ 2.0
GG 0/1
For all straight stitching and topstitching work up to 6 mm
For serging and appliqué. Also suitable for tapering, eyelet
embroidery and cording work.
0/ 1
Straight stitch: For all sewing and top-stitching operations
which require a left needle position.
Zigzag stitch: For serging, appliqué and tapering.
0/ 1
Straight stitch: For most sewing and top-stitching
operations.
Zigzag: for most zigzag operations.
0/ 1
Straight stitch: For all sewing and top-stitching operations
which require a right needle position.
Zigzag stitch: For serging, appliqué, tapering and cording
work.
HH 0/3
For invisible hemming on woven materials.
II 0/1
A traditional decorative stitch.
KK 0/3
For Á at overlapped seams.
LL 0/1
For overcasting, sew ing on elastic, darning tears and
inserting patches.
MM 0/1
For overcasting, sew ing on elastic, darning tears and
inserting patches.
IG - 0/ 1
A traditional decorative stitch.
LC - 0 / 1
A dainty decorative stitch.
LG - 0 / 1
A dainty decorative stitch.
LI LI 0 / 1
A traditional decorative stitch.
MDF - 0/ 1
A traditional decorative stitch.
To Next Page
Loading...
