Pfeiffer Vacuum TPG 300 User Manual

BG 805 970 BE (0306) TPG 300.oi 25
The TPG 300 has three operating modes:
• »sensor«
Pressure measurement (→  26)
Selection of the measuring circuit (→  27)
Switching gauges on/off (→  28)
• »set point«
Display of the switching function parameters
(→  32)
• »set up«
Display of the unit parameters (→  35)
Modification of the unit parameters (→  36)
Execution of test programs (→  50)
»sensor«
»set point«
»set up«
Code entry
if required
After 1 ... 2 Min.
Mains power on
5.4 Operating Modes
Changing the
Operating Mode

Pfeiffer Vacuum TPG 300 Specifications

General

Display	LCD
Communication Interfaces	RS232, RS485, Ethernet
Temperature Range	0 to 50 °C
Accuracy	Dependent on connected gauges
Outputs	Analog, Relay
Operating Temperature	0°C to +50°C
Dimensions	96 mm x 96 mm
Type	Pirani Gauge Controller