Need help?Do you have a question about the Pfeiffer Vacuum TSH 071 E and is the answer not in the manual?
General| Brand | Pfeiffer Vacuum |
|---|---|
| Model | TSH 071 E |
| Category | Water Pump |
| Language | English |
Provides guidance on symbols and abbreviations used within the operating instructions.
Defines safety pictograms indicating potential hazards like personal injury or damage.
Details the primary characteristics and components of the turbomolecular drag pumping station.
Explains the control system and options for operating the pumping station.
Lists the individual components of the pumping station and their corresponding part numbers.
Outlines essential pre-installation steps, including safety precautions and setup requirements.
Provides instructions for correctly connecting the exhaust line to the pumping station.
Details the procedures and safety considerations for venting the turbomolecular drag pumps.
Covers the necessary electrical connections and voltage selection for the pumping station.
Guides on how to connect the pumping station to the vacuum system, emphasizing cleanliness.
Explains standard air cooling and the option for water cooling for the pumping station.
Details how to connect the casing heating for accelerated final pressure attainment.
Presents a detailed schematic illustrating the electrical and accessory connections for the system.
Information on lubricant for the turbomolecular drag pump and diaphragm vacuum pump.
Key safety warnings and checks to perform before starting the pumping station.
Step-by-step instructions for starting the pumping station, both with and without the DCU 001.
Instructions on how to safely shut down the pumping station, with and without the DCU 001.
Details on lubricant type, replacement frequency, and order number for turbopump reservoirs.
Provides physical dimensions of the pumping station in millimeters.
To Next Page