Operating Instructions Contador
© 2019 – Pfeuffer GmbH Revision 6 Page 37 of 40
The preset plus count is bigger than
Change the preset or count
accordingly.
»feed container
missing« or »collection
container missing«
The feed container or the drawer is
missing.
The connection cable to the
CONTAFILL is not connected.
Place the feed container or the
drawer.
Connect the connection cable
CONTADOR ↔ CONTAFILL
the device displays
The grain size > 150 was selected.
Select a smaller grain size.
»bag missing«
automatically after it has found 10
times no bag for filling.
turned by the arrow
key .
The connection cable to the
CONTAFILL is not connected.
The carousel is not properly locked.
Connect the connection cable
CONTADOR ↔ CONTAFILL properly.
Insert the carousel correctly, see
Control/Ext. Steuerung«
does not light up after
switching on.
The connection cable between
CONTADOR ↔ CONTAFILL is
interrupted or not connected.
Check that the CONTADOR ↔
CONTAFILL connection cable is
connected correctly.
The software version on the
CONTADOR is not suitable for
operation with the CONTAFILL.
Please contact Pfeuffer GmbH.
All error messages are confirmed with the button , so that the device continues in
the work sequence.