EasyManua.ls Logo

Pfister Pot Filler GT533-PF User Manual

Pfister Pot Filler GT533-PF
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Copyright © 2012, Pfister™ Inc.
417420100
December 19, 2012
Installation Support • Soporte de instalación • Support d’installation
Personal Assistance, Product Specs, &
“How-to” Questions:
Asistencia personal, especificaciones del
producto y preguntas sobre “cómo hacerlo”:
Aide personnelle, spécifications du produit
et questions “pratico-pratiques” :
1800PFAUCET (7328238)
pisterfaucets.com/support
Installation Videos Available
Videos de instalación a disposición
Vidéos d’installation disponibles
pisterfaucets.com/videos
Pot Filler Faucet
Olla relleno grifo
Robinet de remplissage pot
1
Parts in the Box
Piezas en la caja
Pièces dans la boîte
Locate water supply and shut of the water supply valve.
Localice el suministro de agua y cierre la válvula de suministro de agua.
Localisez l'approvisionnement en eau et fermez le robinet d'alimentation en eau.
Quick Installation Guide
Guía de instalación rápida
Guide dInstallation Rapide
Pot Filler™
Turn O Water Supply Cierre el suministro de agua Couper lalimentation en eau
To reduce the risk of injury or property damage, read all instructions before installing product. Wear safety goggles. Product must be installed in
accordance with all state & local plumbing & building codes. Call a professional if you are uncertain about installing this product.
Para disminuir el riesgo de lesiones o daños a la propiedad, lea todas las instrucciones antes de instalar el producto. Utilice gafas de seguridad. El producto deberá
instalarse de acuerdo con la normativa de plomería y construcción estatal y local. Llame a un profesional si no está seguro sobre cómo instalar este producto.
Pour réduire le risque de blessures ou de dommages, lire toutes les instructions avant d’installer le produit. Portez des lunettes de sécurité. Il faut installer
le produit en respectant tous les codes de construction et de plomberie locaux et détat. Appelez un professionnel si vous n’êtes pas certain de la façon
d’installer ce produit.
GT533-PF
A
D
C
B
EO8034L
WARNING / ADVERTENCIA / AVERTISSEMENT
Required Tools
Herramientas necesarias
Outils nécessaires
Additional Helpful Tools
Otras herramientas útiles
Outils supplémentaires utiles
Adjustable Wrenches
Llaves ajustables
Clés â mollette
Flashlight
Linterna
Lampe de poche
Cloth
Paño de limpieza
Chion
Power Drill
Taladro Eléctrico
Foreuse Électrique
Philips Screwdriver
Destornillador de estrella
Tournevis Philips
Safety Goggles
Anteojos de seguridad
Lunettes de securité
PTFE plumber's tape
Cinta para plomería PTFE
Ruban PTFE de plombier
Mallet
Mazo
Maillet
Pencil
Lápiz
Crayon
Hex Wrench
Llave hexagonal
Clé hexagonale
E (x4)
F (x4)
Question and Answer IconNeed help?

Do you have a question about the Pfister Pot Filler GT533-PF and is the answer not in the manual?

Pfister Pot Filler GT533-PF Specifications

General IconGeneral
BrandPfister
ModelPot Filler GT533-PF
CategoryPlumbing Product
LanguageEnglish

Summary

Installation Preparation and Safety

Safety Warnings and Precautions

Read all instructions before installation. Wear safety goggles. Follow local plumbing and building codes. Consult a professional if unsure.

Tools and Parts Checklist

Identify required tools and check all parts included in the box before starting the installation process.

Step 1: Turn Off Water Supply

Locate the water supply and shut off the main valve before proceeding with installation.

Mount Spout Holder

Prepare Mounting Location

Use the holder as a template to center and mark screw holes around the pipe.

Secure Spout Holder Assembly

Attach the spout holder to the wall using the provided screws and hardware.

Attach Spout

Prepare Spout Threads

Apply PTFE plumber's tape or thread sealant to the spout threads as per manufacturer instructions.

Connect and Secure Spout

Connect the spout to the holder and tighten securely using the hex wrench.

Water Activation and Final Checks

Prepare for Water Turn-On

Ensure both valves are in the closed position before turning on the water supply.

Activate Water Supply

Slowly open the main valve first, then the end valve, and confirm proper installation.

Stowing the Faucet

Illustrates how to fold or stow the faucet when not in use.

Related product manuals