What to do if my Pfister Lita fittings are leaky?
If you have leaky fittings in your Pfister Plumbing Product, it might be due to improper tubing installation. Ensure you follow the installation instructions carefully, and check that the tubing is free of any damage and installed to the correct depth.
Why is my Pfister Plumbing Product water dispensing so slowly?
If your Pfister Plumbing Product is dispensing water slowly, the filter canisters may be clogged due to prolonged use or high sediment levels. It's recommended to replace both filter canisters every six months to prevent clogging.
How to eliminate chlorine taste and odor in my Pfister Plumbing Product water?
If you notice chlorine taste and odor in your Pfister Plumbing Product water, it indicates that the filter canisters are no longer effectively reducing chlorine. You should replace the filter canisters.
Why is no water dispensing from my Pfister Lita?
If water is not dispensing from your Pfister Plumbing Product, it could be due to filter canisters not being fully installed. Make sure to fully follow the filter replacement instructions.
Why is the water flow low in unfiltered mode on my Pfister Lita?
If you experience low water flow from your Pfister Plumbing Product faucet while in unfiltered mode, your aerator may be clogged. Remove and clean the aerator, flush your faucet for 15 seconds, and then reinstall the aerator.
Why is the water from my Pfister Lita Plumbing Product cloudy or has air bubbles?
Cloudy water or air bubbles in your Pfister Plumbing Product after installation are likely due to air in the system. This should disappear after running the water for a while.
Why does the water from my Pfister Lita contain tiny black particles?
If the water from your Pfister Plumbing Product contains tiny black particles, it's because new filter canisters contain activated carbon. Turn on the filtered water faucet and allow it to run for about 10 minutes to flush out any harmless carbon fines.
General| Number of Handles | 1 |
|---|---|
| Flow Rate | 1.2 GPM |
| Handle Style | Lever |
| Valve Type | Ceramic Disc |
| Material | Brass |
| ADA Compliant | Yes |
| Type | Faucet |
| Finish | Polished Chrome |
| Installation Type | Deck Mounted |
| Mounting Type | Deck Mount |
Explains how to obtain filtered cold water by pushing the handle back.
Describes regular handle use for washing dishes.
Information on installation guides and step-by-step videos.
Guidance on filter replacement frequency and automated reminders.
Details the capabilities of the GE® 2X High Flow Filtration System.
Instructions for cleaning the faucet surface with a damp cloth.
Recommends replacing filters every 6 months or setting up reminders.
Explains the 'twist & lock' mechanism for filter cartridge replacement.
Clarifies that the filter system only works with cold water supply.
Explains factors affecting filtered water dispensing frequency.
Provides contact details for faucet and filter system inquiries.
Explains black particles are from activated carbon and how to flush.
States cloudy water or air bubbles will resolve after running water.
Advises replacing filter canisters if chlorine taste/odor persists.
Suggests replacing filters if dispensing is slow due to clogging.
Advises checking tubing installation for leaks.
Recommends checking filter canister installation for water flow issues.
Suggests cleaning the aerator for low flow in unfiltered mode.
States a One-Year Limited Warranty for the GE Filter Manifold.
States a One-Month Limited Warranty for GE Filter Cartridges.
Encourages online registration for warranty coverage and support.
Lists crucial safety guidelines for proper filtration system usage.
Covers electrical components for five years against defects.
Covers GE filter components (excluding cartridges) for one year.
To Next Page