Pfister Selia F-042-SL User Manual

384130100
Installation Support • Soporte de instalación • Support d’installation
Installation Videos Available
Videos de instalación a disposición
Vidéos d’installation disponibles
Personal Assistance, Product Specs, &
“How-to” Questions:
Asistencia personal, especificaciones del
producto y preguntas sobre “cómo hacerlo”:
Aide personnelle, spécifications du produit
et questions « pratico-pratiques » :
1800PFAUCET (7328238)
pisterfaucets.com/support
pisterfaucets.com/videos
May 12, 2011
4" Single Control Centerset Faucet
Grifo de Centerset del solo control de 4 pulgadas
Robinet de Centerset de commande simple de 4 pouces
Required Tools
Herramientas necesarias
Outils nécessaires
Additional Helpful Tools
Otras herramientas útiles
Outils supplémentaires utiles
Parts in the Box • Piezas en la caja • Pièces dans la boîte
1
Safety Goggles
Anteojos de seguridad
Lunettes de sûreté
Plumber’s Putty
Masilla para plomeria
Mastic de plombier
Adjustable Wrenches
Llaves ajustables
Clés â mollette
Flashlight
Linterna
Lampe de poche
Cloth
Paño de limpieza
Chion
Quick Installation Guide
Guía de instalación rápida
Guide d’installation rapide
F-042-SL
Selia™
WARNING / AVERTENCIA / AVERTISSEMENT
To reduce the risk of injury or property damage, read all instructions before installing product. Wear safety goggles. Product must be installed in
accordance with all state & local plumbing & building codes. Call a professional if you are uncertain about installing this product.
Para disminuir el riesgo de lesiones o daños a la propiedad, lea todas las instrucciones antes de instalar el producto. Utilice gafas de seguridad. El producto
deberá instalarse de acuerdo con la normativa de plomería y construcción estatal y local. Llame a un profesional si no está seguro sobre cómo instalar este
producto.
Pour réduire le risque de blessures ou de dommages, lire toutes les instructions avant d’installer le produit. Porter des lunettes de sécurité. Le produit doit
être installé en conformité avec tous les codes de construction et de plomberie locaux et de l'état. Appelez un professionnel si vous n’êtes pas certain de la
façon d’installer ce produit.
Locate water supply inlets and shut of the water supply valves. These are usually
found under the sink or near the water meter. If you are replacing an existing faucet,
remove the old faucet from the sink and clean the sink surface thoroughly.
Ubique las entradas del suministro de agua y cierre las válvulas de suministro de agua.
Generalmente se encuentran debajo del fregadero o cerca del medidor de agua. Si se trata de
un reemplazo de grifo, quite el grifo viejo y limpie completamente la supericie del fregadero.
Recherchez les entrées d'approvisionnement et fermer leurs robinets. Ces robinets se
trouvent généralement sous l'évier ou près du compteur d’eau. Si vous remplacez un robinet
existant, retirez, le vieux robinet de l'évier et nettoyer soigneusement la surface de ce dernier.
¡
Turn O Water Supply • Cierre el suministro de agua • Couper l’alimentation en eau
Hot
Caliente
Chaud
Cold
Fría
Froid
B
G
E
D
C
(x2)
(x2)
A
F

Pfister Selia F-042-SL Specifications

General

Product Type	Bathroom Faucet
Brand	Pfister
Collection	Selia
Model Number	F-042-SL
Handle Style	Lever
Flow Rate	1.2 GPM
Valve Type	Ceramic Disc
ADA Compliant	Yes
Material	Metal
Installation	3-Hole
Warranty	Lifetime Limited Warranty

Summary

Installation Support and Safety Information

Contact and Resources

Phone number, website, and video links for installation assistance.

Critical Safety Warning

Emphasizes reading instructions and wearing safety goggles before installation.

Installation Preparation and Step 1

Tools and Parts Checklist

Lists required and helpful tools, plus components included in the box.

Step 1: Turn Off Water Supply

Guide to locating and closing water supply valves before installation.

Option 1: Install Faucet without Deckplate

Disassemble Faucet Components

Steps for taking apart the faucet before installation.

Mount Faucet to Sink

Securing the faucet body (A) to the sink using putty (B).

Secure Faucet Assembly

Instructions for tightening washers (A2, A3) and ensuring proper alignment.

Option 2: Install Faucet with Deckplate

Disassemble Faucet Components

Steps for taking apart the faucet and deckplate before installation.

Mount Faucet and Deckplate

Securing the faucet (A) and deckplate (C, D) to the sink with putty.

Secure Faucet Assembly

Instructions for tightening washers (A2, A3) and ensuring proper alignment.

Connect Water Supply Lines

Supply Line Installation Note

Warning about using correct supply lines and fittings to prevent leaks.

Connecting Hot & Cold Lines

Detailed steps for attaching the hot and cold water supply lines.

Prepare & Install Push & Seal™ Drain

Disassemble Pop-Up Drain

Steps for taking apart the Push & Seal drain body (E).

Align Drain Logo to Sink

Ensuring the drain's logo is correctly aligned with the sink.

Install Drain Body

Partially threading and then firmly screwing the drain body into the sink.

Connect Drain to Plumbing

Connecting the installed drain assembly to the existing drain pipes.

Final Checks and Faucet Function

Turn On Water & Check for Leaks

Instructions for turning on the water supply and inspecting for leaks.

Faucet Operation

Demonstrates how to operate the hot and cold water controls.