PFREUNDT WK60 Series User Manual

3
PFREUNDT GmbH | Operating Manual | WK60-RAD-BA-H-2022.01-EN
2. Safety notes
Structural changes to the scale and its components may result in a threat to life
due to falling loads.
• Repairs or structural changes to the scale and its components are not permit-
ted.
• Conversions of and repairs to the scale may only be carried out by individuals
trained and authorized by the manufacturer.
• Only original spare parts and accessories approved by the manufacturer shall
be used.
Inadequate maintenance can endanger persons due to undetected damage to
the scale.
• Inspect the scale and all associated components for damage regularly.
• Have damaged components replaced by PFREUNDT Service.
2.1 Intended use (for legal-for-trade scales)
The scale is designed for use on:
• Wheel loaders with a loading bucket *
• Forklift truck with lifting forks or loading buckets as load carrier *
• Telescopic handlers with lifting forks or a loading bucket *
* Approved for Europe, other internaonal approvals available.
This type of construcon can only be used if weighing the bulk goods has been
secured so that the loose goods will not tend to sck together.
Changes to the liing lever, the liing cylinder, the switching points of the prox-
imity switches / posion sensor are not permied.
Any use other than as designated shall be deemed
incorrect.

PFREUNDT WK60 Series Specifications

General

Brand	PFREUNDT
Model	WK60 Series
Category	Controller
Language	English