Need help?Do you have a question about the PG Drives Technology S120A and is the answer not in the manual?
General| Model | S120A |
|---|---|
| Category | Controller |
| Input Voltage | 24VDC |
| Output Current | 120A |
| Control Method | PWM (Pulse Width Modulation) |
| Protection Features | Overcurrent, Overvoltage, Overtemperature |
Important warnings and safety guidelines for operating the S-Drive controller.
General guidelines for making electrical connections to the S-Drive controller.
Requirements for circuit protection against short circuits in battery wiring.
Matching the controller to the motor for optimal performance and control.
Guidelines for physically mounting the S-Drive controller on the scooter.
Explanation of programmable parameter limits for safety.
Detailed description of parameters related to speed, acceleration, and deceleration.
Configuration of throttle type, deadband, gain, and power-up behavior.
Parameters related to battery monitoring, alarms, and gauge calibration.
Configuration of inhibit inputs for safety and speed limiting functions.
Parameters for soft-stop, brake time, output voltage, and diagnostic settings.
Parameters for current limits, boost, foldback, and motor compensation.
Detailed listing and explanation of crucial safety warnings.
Warnings regarding system malfunctions, EMI, and general safety.
Warning about conducting safety checks in a safe environment.
Warning about incorrect programming and its safety implications.
Warnings regarding unauthorized servicing and potential damage.
Technical electrical specifications for various S-Drive models.
Assessment of S-Drive conformity with ISO 7176-14 standard.
Detailed findings on S-Drive product family conformity to ISO 7176-14.
Step-by-step procedure for setting up the vehicle and programming parameters.
To Next Page
