M
A
I
N
T
E
N
A
N
C
E
of EVAPORATED EMISSION CONTROL (EEC) SYSTEM
-
-
optional
1.EEC
is
a device designed to collect the evaporated
HC
generated from Fuel Tank and to direct the
HC
into Carbure
-
tor for re
-
combustion, thus avoiding the air pollution caused by the fuel emission. (please
see
the drawing illustration
on
page30)
2.Periodical Checking
a).make sure the tube and joint are fixed and intact, if not, should be replaced.
b).Activated Carbon Can
-
test the ventilation by mouth
-
puffing air, if clogged or not ventilated, should be replaced
c).Fuel Leak Cutting Valve
-
place the scooter inclined to test the fuel leak, if the leak over 15cc, the Valve
is
not
working well and should be replaced.
3.Non-Periodical Checking
When scooter accident occurs, the EEC system should be checked to
see
whether if tube and parts are fractured or
loosen and should be treated as in periodical checking.
To Next Page
