PGO Big Max 90 - Fuse and Battery; Fuse Replacement Guide; Battery Care and Warnings

CHANGING FUSE:
1.THE FUSE IS LOCATED BESIDE THE
BATTERYWNDER THE STEP BOARD)
2.TAKE OFF (a) 3 SCREWS ON THE COVER
(b) THE COVER
3.IF THE FUSE IS BURNED OUT, TURN OFF
THE MAIN SWITCH AND THE SWITCH OF
THE PROBLEM PARTS. CHANGE A NEW
CORRECT FUSE. TURN ON THE SWITCH, AND
CHECKING THE OPERATION SITUATION. IF
THE NEW FUSE IS BURNED OUT AGAIN,
PLEASE GO. TO SEE YOUR
DEALER.
N0TE:DO NOT USE A HIGHER AMPERE FUSE
I.EYE CHECKING OPERATION CHECKING
THAN THE ORIGIAN SPEC. A DIFFERENT
(ABNORMAL) FUSE WILL SERIOUSLY DEGRADE
THE BATTERY SYSTEM AND MIGHT CAUSE
FIRE.
BATTERY:
THE BATTERY IS SEALED, SO YOU DON'T
NEED TO CHECK THE LIQUID NOR REFILLING.
IF THE LIQUID IS LEAKING, PLEASE GO AND
CHECK WITH YOUR DEALER.
NOTEPLEASE DO
NOT TAKE OFF THE SEAL
ROI,T OF THE
BATTERY, THAT WILL DAMAGE YOUR
BATTERY SYSTEM.