N0TE:USING SOLVENT TO CLEAN THE SPONGE
ONI.,Y. DO NOT USE EASY FIRING
&
EXP1,OSION
SOLVENT.
1.
SPONGE
5.DRY OUT THE SOLVENT OF THE SPONGE
BUT AVOID DESTROYING IT.
G.REFII,L FEW 1,UBRICANT OIL ON THE
SURFACE OF THE SPONGE (ONLY WET
IT
BUT NOT DIP IT IN THE OIL).
7,PUT BACK THE SPONGE ON THE
AIRCLEANER AND PERFECTLY FASTER THE
COVER WITHOUT ANY LEAKING.
8.ASSEMRLING THE AIR
-
CLEANER
&
PUT RACK
TO ITS ORIGINAL
PLACE. PLEASE
MAKE
SURE THE SCREWS ARE FASTENED
'r0
AVOID THE AIR(WH1CH IS NOT THROUGH
THE. AIR
-
CLEANER) GO INTO THE ENGINE.
NOTEPLEASE DO NOT START THE ENGINE
BEFORE THE AIR
-
CLEANER IS ASSEMBLED,
O
T
H
E
R
W
I
S
E
T
H
E
PISTON/MAIN
C
A
S
E
WILL
B
E
BADLY WORN OUT.
CHECKING THE SPARK PLUG:
SPARK PLUG IS ONE OF THE IMPORTANT
PARTS OF THE ENGINE
AND
IT IS EASY TO BE
CHECKED. ACCORDING TO SPARK PLUG CONDI
-
TION, YOU MAY INFER THE SITUATION OF
THE ENGINE. THE IDEAL COLOR OF THE
ELEC-
TRCDE SHOULD BE LIGHT BROWN. IF THERE'S
ANY PROBLEM, PLEASE ASK YOUR DEALERS
TO CHECK FOR YOU. PLEASE TAKE OFF THE
SPARK PLUG AFTER A PERIOD OF TIME
BECAUSE IT WILL BE CORRODED
&
WORN OUT
DUE TO THE HOTNESS AND DIRT FOR THE
TIME BEING. IF HAPPENED, PLEASE CHANGE A
NEW SPARK PULG.
Standard Spark Plug
BP7HS (NGK)
L82YC (CHAMPION)
To Next Page
Loading...
