EACH INDICATOR LIGHT
OIL
WARNING LAMP(RED):
1.SIGNAI. LIGHT INDICATOR L.HIGH
BEAM
INDICATOR
3.OIL \VARNING
LAW'
SIGNAL LIGHT (YELLOW):
WHEN OPERATING, THE LAMP
WILI, FLASH
WITH SOUND.
HIGH BEAM INDICATOR
(B1,UE):AS THE
ENGINE START
-
"
HI
"
LIGHTS INDICATING
THAT THE HIGH BEAM IS WORKING.
IF THE OIL IS NOT
ENOUGH,THE LIGHT WILL
BE
"
ON
"
THEN
YOU
SHOULD REFILL THE OIL.
AFTER THE
011, IS REFILLED, THE OIL
WARN
-
ING LIGHT WILL BE OFF.
NOTE:
WHEN THE MAIN SWITCH IS
"
ON
"
THE OIL
WARNING LAMP WILL
"
ON
"
FOR A FEW
SECONDS
AND
LATER IT WILL BE
"
OFF
"
.
IF
THE
LAMP
IS NOT ON, THE BULB MIGHT BE
BROKEN.PLEASE CHECK THE CIRCUIT SYSTEM
OR TAKE IT TO YOUR DEALERS
FOR
CHECKING.
PLEASE
BE
SURE THE OIL IS ENOUGE, THEN
YOU
MAY
RIDE IT.
To Next Page
Loading...
