PGO G-MAX220 - Lubrication Instructions

(3) Lubrication instruction
A. 2T Engine (50 cc)
NO Lubrication location Oil type Remarks
1 Crankcase: rotating part,
Sliding part
2 Cylinder: rotating part,
Sliding part.
Premium 2 stroke
Motorcycle oil
Or SAE#30
Separated-pump
Lubrication
3 Drive gear box SAE85-140 Total 110 c.c.
Replacement 90c.c
4 Gasket of starter shaft Clean grease (#3)
5 Start idle gear sliding
parts
Clean grease (#3)
B. 4T Engine (125/150 /200/220cc)
NO Lubrication location Oil type Remarks
1 Crankcase: rotating part,
Sliding part
2 Cylinder: rotating part,
Sliding part.
premium 4 stroke
motorcycle oil
or SAE15W40
Auto-Separated
Lubrication
 M2-125/150
Total 900 c.c.
Replacement 800c.c
 M2-200/220
Total 1400 c.c.
Replacement 1000c.c
3-1 Drive gear box(M2-125/150) SAE85-140 Total 110 c.c.
Replacement 90c.c
3-2 Drive gear box(M2-200/220) SAE85-140 Total 130 c.c.
Replacement 110c.c
4 Gasket of starter shaft Clean grease (#3)
5 Start idle gear sliding
parts
Clean grease (#3)