Need help?Do you have a question about the Phantom Sure View SU0508L and is the answer not in the manual?
Verify screen compatibility with door opening dimensions.
Confirm sufficient flat and square mounting area on door frame.
Ensure door frame is square for optimal screen operation.
Confirm the screen package matches the door's hinge configuration.
List of all parts included in the Sure View Screen package.
List of common household tools needed for installation.
Record the smallest width and height measurements of the door frame.
Instructions for using a filler strip if the door opening exceeds maximum height.
Formula for calculating the length to cut for top and bottom rails.
Formula for calculating the length to cut for housing and catch frame.
Step-by-step guide for accurately cutting the top rail.
Guide for selecting and cutting the correct bottom rail for the door sill.
Instructions for cutting the catch frame to the required length.
Prepare the screen housing assembly by removing parts and aligning components.
Cut the assembly and reassemble it after cutting.
Steps to attach the mounting bracket to the door frame securely.
How to pivot and snap the screen housing onto the mounting bracket.
Remove backing, slide, align, and secure the top rail to the assembly.
Insert the catch frame into the top rail end cap and attach to the door frame.
Choose the correct bottom rail and attach it to the door sill.
Adjust catch position for secure latch contact and tighten.
Apply stickers to the front and rear of the latch as indicated.
Adjust mesh lock to keep screen taut and effective.
Fine-tune spring tension for proper retraction speed.
Lubrication tips, avoiding petroleum products, and cleaning the bottom rail.
Information on how to purchase replacement mesh cartridges.
Details of the limited lifetime warranty for Sure View Screen components.
Clarifies screen purpose and disclaims liability for other uses.
Specific advice on maintaining the bottom rail and mesh guide.
To Next Page
General