phase II+ UTG-2800 - Overview; Product Specifications

To Next Page

To Previous Page

1 Overview

The UTG-2800 is a digital ultrasonic thickness gauge. Based on the same

operating principles as SONAR, the instrument is capable of measuring the

thickness of various materials with accuracy as high as 0.001”. It is suitable for

testing a variety of metallic and non-metallic materials.

1.1 Product Specifications

1) Display：4.5 digits LCD with EL backlight.

2) Measuring Range：0.030” – 12.0” (0.75～300mm) (in Steel).

3) Sound Velocity Range: 3280-32805 ft/s (1000~9999 m/s).

4) Resolution：0.001”/0.01mm (selectable)

5) Accuracy： (± 0.5%Thickness+0.001”) depends on materials and conditions

6) Units: Metric/Imperial unit - selectable.

7) Four measurements readings per second for single point measurement, and ten per second for

Scan Mode.

8) Memory for up to 20 files (up to 99 values for each file) of stored values.

9) Power Source：Two “AA” size, 1.5 Volt alkaline batteries. 100 hours typical operating time

(EL backlight off).

10) Communication：USB via output cable

11) Outline dimensions：150×74×32 mm.

12) Weight：245g