Phcbi MDF-U443 - User Manual

40 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

MDF-U443



Please read the operating instructions carefully before using this product, and keep the operating

instructions for future use.

See page 35 for model number.

Operating Instructions

Biomedical Freezer

Table of Contents

Questions and Answers

E
Erica WiseAug 11, 2025
Why is the cooling poor in my Phcbi MDF-U443?
- C
  Carl WelchAug 12, 2025
  Poor cooling in your Phcbi Medical Equipment can stem from several factors. The environmental temperature might be too high, or the door may not be shut tightly. A clogged filter, direct sunlight exposure, or a nearby heating source could also be contributing. Ensure the rubber cap and insulation for the access port are correctly set. Avoid putting too many unfrozen articles into the freezer compartment. Also, the condenser filter might be clogged; clean it when the filter check lamp blinks and the buzzer sounds.
M
Michael OrtizAug 21, 2025
Why is the alarm activated on my Phcbi MDF-U443?
- L
  Larry MoranAug 22, 2025
  The alarm on your Phcbi Medical Equipment can activate for several reasons. On start-up, it could mean the internal temperature doesn't match the set value. During use, it might be triggered if the door was kept open too long, the set value was changed, or containers of high temperature were placed inside.
C
Carla BushAug 31, 2025
How to remove condensation on Phcbi MDF-U443 Medical Equipment?
- W
  waynegordonAug 31, 2025
  If your Phcbi Medical Equipment has condensation on the surface, wipe it off using a dry cloth.

Phcbi MDF-U443 Specifications

General

Type	Upright Freezer
Number of Doors	1
Defrosting	Automatic
Certification	CE, UL
Power Supply	220-240V, 50/60 Hz
Alarm System	Visual and audible alarm
Display	Digital