6CP200/100-10
3-3
CONTROLS AND INDICATORS
High Voltage Transformer
Figure 3-2
333
Descriptions are keyed to Figure 3-2
1. Power Connector. Connect the Power Cable from Output to Transformer connector on control box at this
point.
2. High Voltage Ground Point. A ground cable from facility ground or earth ground must be connected
here.
3. Ground/Guard/Return Circuit. Select current to be read on currentmeter. Care must be taken to ensure
that test specimen can be isolated from ground before using this option.
4. TX1 Connector. Signal/Metering cable connects from here to TX1 on control box.
5. Power Connector. Connect power cable from this point to multilamm style connectors on Top Module.
6. Lundeys. Provide sealed air-to-oil interface for connections.
To Next Page
Loading...
Need help?
General
