Phenomenex GC - Appendix D Strata and Strata-X SPE Products

www.phenomenex.com
10
Trademarks
Zebron, Inferno, Cool-Lock, Phenex, Strata-X, Guardian, GuideRight, PhenoRed, PhenoGreen, and WAXPLUS are trademarks of Phe-
nomenex, Inc. Strata is a registered trademark of Phenomenex, Inc. Wite-Out is a registered trademark of BIC Corporation. Vespel
and Teon are registered trademarks of E.I. du Pont de Nemours and Co. CD Vial and Qsert Vial are trademarks of AR Corporation.
© 2009 Phenomenex, Inc. All rights reserved.
Disclaimer
Subject to Phenomenex terms and conditions, which may be viewed at
www.phenomenex.com/TermsAndConditions.
Strata
®
and Strata
™
-X SPE Products
SPE products can help to eliminate contaminants and matrix effects for increase
signal-to-noise ratios and longer column lifetimes. Phenomenex has two types
of SPE sorbents:
Product Offerings:
Strata - Silica Solid Phase Extraction (SPE) Products1.
Used for cleaning samples, concentrating analytes, and solvent-•
switching quickly and easily
Removes contaminants and eliminate matrix effects for improved •
separation and column lifetime
Selecting a SPE Sorbent: Please call your Phenomenex Sample Preparation Specialist for help in selecting the right SPE sorbent
for your analysis.
Standard Tubes for
Traditional SPE
Formats: Strata and Strata-X SPE products are available in multiple formats:
Teflon
®
-Coated Tubes for
Extra Inert Analysis
Large Volume/Flash
Analysis Cleanup
96-Well Plates for High-Throughput
Tab-less Tubes
20 x 2.0 mm
On-line Extraction Cartridges
Large Volume
Strata-X-Polymeric Solid Phase Extraction (SPE) Sorbents. 2.
(Same functions as Strata but with the additional benefits):
De-conditioning resistant surface resists dry out and de-activation and •
provides worry-free manual and automated processing
pH stability from 1-14 for flexible method development •
Ability to load up to 66 % more in comparison to silica-based sorbents •
per gram
Appendix D
If Strata and Strata-X SPE products do
not perform as well or better than your
current SPE product of similar phase,
mass and size, return the product with
comparative data within 45 days for a
FULL REFUND.