Phenomenex GC - Appendix B Other Recommended GC Accessories; Gold Inlet Base Seals; Replacement Inlet Seal Washers; GuideRight Injection Hole Septa

www.phenomenex.com
8
GuideRight
™
Injection Hole Septa
The GuideRight
™
through-hole guides the needle during injection. Septum
performance and lifetime increase while downtime due to bent needles or dirty
injection ports decreases. Choose from either high temperature PhenoGreen
™
or
PhenoRed
™
, both rated to 400 °C.
Other Recommended GC Accessories
Gold Inlet Base Seals
Prevents analyte adsorption•
Improves detection sensitivity •
Improves method reproducibility•
Fits all Agilent 5890/6890 split/splitless injection ports•
Part No. Description Similar to Mfr. No.* Unit
Standard, single groove for splitless applications, 0.8 mm dia. inlet hole
AG0-7518 Gold Inlet Base Seal, splitless (single groove), 0.8 mm 18740-20885 2/pk
AG0-7519 Gold Inlet Base Seal, splitless (single groove), 0.8 mm 18740-20885 10/pk
High Split Flow, cross groove for split applications, 0.8 mm dia. inlet hole
AG0-7520 Gold Inlet Base Seal, split (double groove/cross), 0.8 mm 5182-9652 2/pk
AG0-7521 Gold Inlet Base Seal, split (double groove/cross), 0.8 mm 5182-9652 10/pk
Replacement Inlet Seal Washers
AG0-8397 Inlet Seal Washers, Gold Plated, for Agilent GC injection port — 12/pk
Long Graphite Ferrules
• High-purity graphite signicantly reduces ferrule bleed
• Special construction minimizes “aking”
• Stable to 450 °C - excellent for high temperature use
Part No. Description Unit
0.4 mm Ferrule ID
AG0-4698 Graphite Ferrule  in. to 0.4 mm 10/pk
AG0-4699 Graphite Ferrule  in. to 0.4 mm 50/pk
0.5 mm Ferrule ID
AG0-4701 Graphite Ferrule  in. to 0.5 mm 10/pk
AG0-4702 Graphite Ferrule  in. to 0.5 mm 50/pk
0.8 mm Ferrule ID
AG0-4704 Graphite Ferrule  in. to 0.8 mm 10/pk
AG0-4705 Graphite Ferrule  in. to 0.8 mm 50/pk
Part No. Description Unit
PhenoGreen  in. (9.5 mm) Diameter
AG0-7874 PhenoGreen 400 Injector Septa 50/pk
PhenoGreen 7⁄16 in. (11 mm) Diameter
AG0-7875 PhenoGreen 400 Injector Septa 50/pk
PhenoRed  in. (9.5 mm) Diameter
AG0-7916 PhenoRed 400 Injector Septa 50/pk
PhenoRed 7⁄16 in. (11 mm) Diameter
AG0-7917 PhenoRed 400 Injector Septa 50/pk
Appendix B