11
5.1.6 Clone Media Files into internal
(1) Clone media files from SD
After cloning, it will jump to 6.1 Import Clone Data .
(2) Clone media files from USB
After cloning, it will jump to 6.1 Import Clone Data .
5.1.7 Setup Complete
When you click “Finish”, it will start “Import” or “Clone
Data”.
If it runs “Import”, it will show 6.1 Import Clone Data .
Otherwise it will show 6.2 Manual Setup Complete .
PS: Do not power off during “Import” and “Clone”
processes, otherwise it will cause data loss.
(1) Import Clone Data
Click “Finish”, run “Import data”, it will re-boot
automatically.
(2) Manual Setup Complete
After finishing manual setup, you can enter Admin Mode
to change settings in the future if necessary.
5.2 Android Launcher
5.2.1. Platform launcher
Platform launcher is black page as below:
Every apps leave by press back key, the screen will go
back to platform launcher..
5.2.2. Admin mode:
Admin mode let user setup and control device.
Pressing “Menu, Volume Down” on keypad to startup
admin mode. Screen show up a dialog request enter
Admin password, default password is “1234”. User
can change password in “Settings -> Signage Display ->
System Tools -> Change the Administrator Password”.
To Next Page
Loading...
