10
EN
Playing cassettes
You can use this TV-Video Combi to playback
recorded VHS video cassettes.You can operate
the TV-Video Combi using the remote control or
the buttons on the set.
Your TV-Video Combi can only record and play
standard VHS cassettes.
1.
1.
Put a cassette into the cassette slot. The cas-
sette is inserted automatically.
2.
2.Press to view the tape.
3.
3.To stop the playback, press or
on the TV-Video Combi.
4.
4.To eject the cassette, press or
when the TV-Video Combi stops
the playback.
Playing back NTSC cassettes
Cassettes that have been recorded in the NTSC
standard (for example, American cassettes) can
be played back using this TV-Video Combi.
Searching for a tape position with
picture (scanning)
1.
1.While a cassette is playing, press
(reverse) or (forward) one or more
times.
2.
2.Press to resume playback.
Still picture
1.
1.During playback, press to stop the
tape and display a still picture.
2.
2.To continue playback, press .
Scanning and still motion interferes with the pic-
ture quality. The sound is switched off. This is not
a fault in your TV-Video Combi.
Searching for tape position without
picture (forward wind and rewind)
1.
1.Stop the tape with .
2.
2.Press (reverse) or
(forward).
3.
3.To stop the tape, press .
Manual Tracking
To adjust the tracking manually, press or
on the TV-Video Combi during playback
.
Tracking returns to Automatic Tracking
Adjustment when you press or insert a
tape.
STOP C-L
P-
P+
STOP C-L
FWD 1- BREW0- s
STOP C-L
PLAY B-K
STILL 2
PLAY B-K
FWD 1- B
REW0- s
STOP/EJECT
EJECT
AA
STOP/EJECT
STOP C-L
PLAY B-K
5. Playback
Do I need to change the playback speed
when playing back LP recordings?
During playback, the correct speed will automati-
cally be selected. For more information, please
read the section 'Selecting the recording speed
(SP or LP)' in the chapter 'Manual recording'.
DIGITAL STUDIO PICTURE CONTROL
Philips has developed a system which produces
the best possible playback quality. For old and
often-used video cassettes, this system reduces
interference. For new or high quality cassettes,
it emphasises the details.
Picture/ sound quality is poor
When playing rental videos or older, poorer
quality cassettes, it may not be possible to com-
pletely filter out picture and sound interference.
This is not a fault in your machine. Read the
section 'Manual tracking'.
Switch-off function (SLEEP TIMER)
Yo u can programme your set to switch-off auto-
matically after a predetermined period.
1.
1.Press .
2.
2.Press repeatedly to extend the time until
switch-off in 30 minute increments.
The screen will show the time remaining until
switch-off, e.g.: '+0:30'.
The machine now counts backwards to the switch-
off time.
SLEEP
SLEEP
The maximum time period to be set until switch-
off is 2 hours.
If you would like to turn this function off, press
on the remote control several times until
switch-off appears. '--:--' will appear on the
screen.
To check the time until switch-off, press
on the remote control.
If a recording is in process, switch-off function
will be cancelled.
SLEEP
SLEEP
T6410EZ(EN).qx3 03.3.22 14:18 Page 10
To Next Page
Loading...
