Philips 160E1SB/93 - Product Profile

73
Meridian 1
1. FOREWORD
This specification describes a 15.6Ǝ WXGA multi-scan color TFT LCD monitor with maximum resolution up to
1366*768/60Hz non-interlaced.
All optical characteristics (including White-D, Brightness and so on) are determined according to panel specification
after warming up approximate 30 minutes that brightness stability is optimal, and follow strictly after panel
specification.
2. PRODUCT PROFILE
This display monitor unit is a color display monitor enclosed in Philips styling cabinet which has an integrated tilt
base.
LCD
Tier1: CMO
Type NR. :M156B1-L01 (TN)
Outside dimensions :363.8 (H) x 215.9 (V) x 14.3 (D)mm (Typ.)
Pitch (mm) :0.252 * RGB (H) mm x 0.252 (V) mm
Color pixel arragnement :RGB vertical stripes
Display surface :Hard coating (3H), Anti-glare treatment of the front polarizer
Color depth :16.7M colors
Backlight :CCFL edge light system
Active area (W xH) :344.23 (H) x 193.56 (V)
View angle :Horizontal 170 (Typ.), Vertical 160 (Typ.)
Contrast ratio :500:1 (Typ.)
White Luminace :250 nits (Typ.)
Gate IC :
Source IC :
Response time :5ms (Typ.)
MTBF :50,000 Hrs
Scanning frequencies
Hor. : 30 – 60 KHz
Ver. : 56 - 76 Hz
Video dot rate : <140 MHz
Power input
: 90-264 V AC, 50/60
r 2 Hz
Power consumption : < 28 W maximum
Functions:
D-SUB analog R/G/B separate inputs, H/V sync separated, Composite (H+V) TTL level, SOG sync
Ambient temperature: 0 qC - 40 qC