101
HUDSON 8
1. FOREWORD
This specification describes a 17" SXGA multi-scan color TFT LCD monitor with maximum resolution up to 1280 x
1024 /76 Hz non-interlaced. All optical characteristics (including WHITE-D, Brightness, and so on) are determined
according to panel specification after warming up approximate 30 minutes that brightness stability is optimal, and
follow strictly after panel specification.
2. PRODUCT PROFILE
This display monitor unit is a color display monitor enclosed in PHILIPS styling cabinet which has an integrated tilt
base.
2.1 LCD
Priority : LPL/CPT/AUO
Type : TN + film
LPL LM170E03-TLL1/TLL4
Resolution : 1280x1024 (SXGA)
Outside dimensions :
Pitch ( mm ) : 0.264 mm x 0.264 mm
Color pixel arrangement : RGB vertical stripes
Display surface : Hard coating (3H), Anti-glare treatment of the front polarizer
Color depth : 16.7 M colors (with A-FRC)
Backlight : CCFL edge light system
Active area(WxH) : 337.9*270.3
View angle (CR>10 ) : 160/160 (typ)
Contrast ratio :800:1 (typ)
White luminance : 300 nit (typ)
Color gamut :72% (typ)
Gate IC :
Source IC :
Response time : 5 ms
CPT CLAA170EA07P-040/050
Resolution : 1280x1024 (SXGA)
Outside dimensions :
Pitch ( mm ) : 0.264 mm x 0.264 mm
Color pixel arrangement : RGB vertical stripes
Display surface : Anti-glare
Color depth : 16.7 M (6 bits + Hi -FRC)
Backlight : CCFL, 4 tables, edge-light(top*2/bottom*2)
Active area(WxH) : 337.9*270.3
View angle (CR>10) : 160/160 (typ)
Contrast ratio : 700:1 (typ)
White luminance : 300 nits (typ)
Color gamut : 72% (typ)
Gate IC :
Source IC :
Response time : 6ms
http://www.wjel.net