113
HUDSON 8
Production alignment spec.
CIE coordinates (x,y)
11500K x = 0.272 ± 0.005
y = 0.283 ± 0.005
9300K x = 0.283 ± 0.005
y = 0.297 ± 0.005
8200K x = 0.292 ± 0.005
y = 0.307 ± 0.005
7500K x = 0.299 ± 0.005
y = 0.315 ± 0.005
6500K/sRGB x = 0.313 ± 0.005
y = 0.329 ± 0.005
sRGB x = 0.313 ± 0.005
y = 0.329 ± 0.005
5000K x = 0.346 ± 0.005
y = 0.359 ± 0.005
Quality Inspection specification:
CIE coordinates (x,y)
9300K x = 0.283 ± 0.015
y = 0.297 ± 0.015
6500K/sRGB x = 0.313 ± 0.015
y = 0.329 ± 0.015
sRGB x = 0.313 ± 0.015
y = 0.329 ± 0.015
5. Mechanical characteristics
5.1 Cosmetic - Philips ID
5.2 Mechanical data files - ProE files required
5.3 Location of Philips logo - Per Philips make-up sheet
5.4 Gap between panel and front bezel < 0.8 (typ) mm
5.5 Location of Control icons - Per Philips Graphic sheet
5.6 Color for resin/paint - Per Philips make-up sheet
5.7 Resins
z RoHS required
z WEEE required.
z Resin type/selection refer to Project Book Section 7.2 Plastic material.
http://www.wjel.net
To Next Page
Loading...
