HUDSON 9
7
3. Operating Instructions
3.1 General Instructions
Press the power button to turn the monitor on or off. The other control buttons are located at the front of the
panel of the monitor.
By changing these settings, the picture can be adjusted to your personal preferences.
-
The power cord should be connected.
-
Connect the video cable from the monitor to the video card.
-
Press the power button to turn on the monitor, the power indicator will light up.
3.2 Control Buttons
Front View
To switch monitor’s power on and off
To access OSD menu/Confirm
To adjust brightness of the display
Auto picture control switching in wide and 4:3 format
Automatically adjust the horizontal position, vertical position, phase and clock setting.
Return to previous OSD level.
To Next Page
Loading...
