37
English
EN
Control settings
[Local KB lock]
[Off]: The TV local buttons will
function normally.
[On]: The TV local buttons
except
B POWER are locked.
[All]: All TV local buttons are locked,
including
B POWER button.
[RC lock]
Disables the operation of the Guest remote
control.
[Off]: All buttons on Guest remote
control will function normally.
[On]: All buttons on the Guest
remote control are disabled. (It is
still possible to enter the Professional
setup menu by pressing [3, 1, 9, 7, 5, 3
+ ¬(MUTE)]).
[OSD display]
Sets this function to show or hide screen
information.
[Off]: Screen information is
suppressed.
[On]: Normal screen information is
displayed.
[High security]
[Off]: Professional mode setup menu
can be accessed by both Guest
remote control (Press [3, 1, 9, 7, 5, 3
+ ¬(MUTE)] )and the Professional
setup remote control
(Press M button)
[On]: Professional mode setup
menu can only be accessed by the
Professional setup remote control.
[Auto scart]
Enables auto scart switching or break-in
Professional mode.
[Off]: Disables auto scart switching or
break-in Professional mode.
[On]: Enables auto scart switching or
break-in Professional mode.
[Power on scart]: Sets scart source
as power on / off button. When the
connected scart source is turned on
/ off, the TV enters to on / standby
mode simultaneously.
[HDMI-CEC in]
HDMI-CEC (Philips EasyLink) enables one-
touch play and one touch standby between
HDMI-CEC compliant devices.
Note
Before activating HDMI-CEC in function, make
sure the HDMI-CEC compliant devices are
turned to on.
Selects [EasyLink] > [On]
[HDMI-CEC in] in Professional mode.
Refer to page 44 “Use Philips EasyLink” for
more details about HDMI-CEC function.
[Off]: Disables HDMI-CEC feature in
Professional mode.
[On]: Enables HDMI-CEC feature in
Professional mode.
[USB break-in]
Enables or disables USB break-in feature in
Professional mode.
[Off]: When USB is plugged in,
the [Multimedia] menu will not
appear automatically, but users can
access [Multimedia] menu from the
[Consumer setup] menu.
[On]: When USB is plugged in,
the [Multimedia] menu appears
automatically.
[Enable teletext]
[Off]: Disables teletext in Professional
mode.
[On]: Enables teletext in Professional
mode.
To Next Page