36 EN
Switch on vol
When the guest switches the TV on, it will play
[Last status]: If [On] is selected, the
TV will be automatically switched
to the last volume status whenever
the mains power is turned on. (The
volume level can not exceed the
[Maximum volume] level).
#<&: (Only appears when
you select [Last status] ≥ [Off]. )
The guest can adjust his/her preferred
switch on volume level.
Switch on channel
When the guest switches the TV on, it will play
[Last status]: If [On] is selected, the
TV will be automatically switched to
the last channel status whenever the
mains power is turned on.
#<&: (Only appears when
you select [Last status] ≥ [Off]). The
guest can choose his / her preferred
switch on channel.
Welcome message
The Welcome message function allows the TV
to show a customized greeting to the hotel
guest whenever the TV is switched on. This
helps to personalize the hotel experience for
guests. The Welcome message can consist
of 2 lines of text, with each line containing a
maximum of 20 alphanumeric characters. Use
the Welcome message.
Note
Welcome message is always disabled if you
select [Control settings] > [OSD display]
> [Off.]
[Display message]: Selects [On] to
activate the welcome message.
[Line 1]: Sets the characters of the
[Line 2]: Sets the characters of the
second line message.
[Clear]: Clear the settings in Line 1
and Line 2.
[Message Time-out]: Sets the period
of time to display the welcome
message on the screen when TV is
turned on from standby / Off.
To Next Page