Philips 2000 series Frequently Asked Questions

4. Press the on/off button on the SmartClean system to start the cleaning program. You will see a
cleaning symbol blinking on the SmartClean system confirming that the cleaning program is
working.
5. If you have more questions regarding the cleaning instructions of your Philips Shaver, refer to your
user manual or call us for support.
6.
5. How do I remove the shaving heads of my Philips shaver?
To deep clean your Philips Shaver, you need to know how to replace the shaving heads of your
shaver. Follow the instructions below on how to do this. Please keep in mind that the instructions for
your specific shaver may be different. It is best to consult your user manual for details.
Removing and reattaching your Philips shaving head
Switch off your shaver and follow the steps below.
1. Pull the shaving head holder off the body of the shaving unit.
2. Twist the retaining rings inside your shaving head holder and pull them out one by one.
3. Remove the shaving heads from the shaving head holder.
4. Each shaving head consists of a cutter and a guard. Please keep in mind that the cutter and guard
are not interchangeable. So make sure you keep them together.
5. Put the shaving heads back into the shaving head holder.
6. Reattach the shaving head holder to the bottom part of the shaving unit.

Philips 2000 series Specifications

General

Room size	Up to 79 m²
Filtration	HEPA and activated carbon filter
Particle filtration	99.97% at 0.3 microns
Filters out	gases
Modes	Auto, Turbo and Sleep
Air quality sensor(s)	PM2.5