Unplug for use
Some Philips Shavers can only be used cordless. If you try to turn these shavers on while they are still
plugged in, an unplug symbol flashes white as a reminder to unplug your shaver.
Exclamation mark
If you see an exclamation mark blinking on your Philips Shaver it can mean a few things.
3. Blocked shaving heads: If you see the exclamation mark along with a tap and a shaving head
symbol, this means the motor of your shaver cannot run anymore because the shaving heads are
soiled or damaged. When this happens, you have to clean the shaving heads or replace them.
4. Overheating: Your shaver may overheat due to excessive charging. When this happens, the shaver
automatically switches off. Let it cool down for a few minutes and try turning it on again.
5. Metallic object on charging pad: If you see an exclamation mark flashing on your Qi pad, it means
that there is a metal object placed on it. This will cause the Qi pad to automatically turn off.
Remove the object and restart the charging pad after 5 minutes.
Cleaning reminder
To maintain your Philips Shaver, cleaning it should be part of your daily routine. You may see a tap
symbol blinking on your shaver once you switch it off as a reminder to clean it.
To Next Page
Loading...
Need help?
General
